Disclosure: Powder & Lead may earn a commission on purchases made through affiliate links in this article, at no extra cost to you. We only recommend products we believe in.
This is Part 1 of my Springfield Kuna review: the gun as Springfield ships it, with nothing changed. The Kuna is a roller-delayed 9mm pistol. Out of the box it’s awesome. It’s a tack driver, the roller delay gives it a great recoil impulse, and it’s nicely balanced. Springfield has an awesome offering here. Part 2 covers what I did to mine afterwards: a Nexus Firearms lower, a forced reset selector, a RISE trigger and a SilencerCo Spectre 9K.

What Springfield Built
Springfield Armory launched the Kuna on April 15, 2025. The company developed it with its longtime partner HS Produkt of Croatia, the same maker behind the XD pistols, and its launch announcement names HS Produkt as the manufacturing partner. The Kuna went on to win Guns & Ammo’s 2025 Handgun of the Year and an NRA American Rifleman Golden Bullseye in 2026.
Like the H&K MP5, it pairs a short barrel and a roller-delayed action with a long magazine ahead of the grip. Springfield now sells it in 9mm and .40 S&W, with or without a Strike Industries FSA folding brace, with 30-round or 10-round magazines, and in newer Tri-Lug versions with a suppressor mount built onto the muzzle.
Springfield Kuna Specs
These come from Springfield’s Kuna page and launch release, for the standard 9mm model.
- Caliber: 9mm (a .40 S&W model is also offered)
- Action: roller-delayed blowback
- Barrel: 6 inches, cold hammer forged, Melonite finish, fixed to the upper
- Muzzle: threaded 1/2×28 with a multi-port brake; Tri-Lug models have a push-and-twist three-lug mount
- Magazines: two translucent 30-round magazines with metal feed lips (10-round on the Low Capacity models)
- Upper: monolithic aluminum with M-LOK slots
- Sights: adjustable hybrid flip-up metal sights
- Controls: fully ambidextrous safety, magazine release and bolt release
- Charging handle: reversible, non-reciprocating, folds out of the way
- Trigger and grip: flat-faced aluminum trigger; AR-pattern grip
- Rear: Picatinny rail end plate, or the Strike Industries FSA brace on brace models
How the Roller Delay Works
A straight blowback 9mm holds the action shut with nothing but bolt weight and spring tension. That works, but it takes a heavy bolt, and the heavy bolt moving back and forth adds to the recoil you feel.
A roller-delayed action uses leverage instead of mass. In the classic H&K design used in the G3 and the MP5, two rollers in the bolt head sit in recesses in the barrel trunnion. When the cartridge fires, the case pushes back on the bolt face, but the bolt head can’t move until the rollers are cammed inward, and that camming drives the heavier rear part of the bolt back faster than the head. The mechanical disadvantage holds the action closed until pressure has dropped. The Kuna works on the same principle. In Springfield’s words, it uses “a roller to temporarily lock the bolt into battery” and “eliminates the need for a heavy bolt or gas system.”
Less reciprocating mass means less felt recoil than a straight blowback gun. That is where the Kuna’s recoil impulse comes from.
How the Springfield Kuna Shoots
It’s a tack driver, the recoil impulse is great, and it’s nicely balanced. I mounted a Sig Sauer Romeo5 red dot and put about 1,200 rounds through it in stock form: CCI Blazer in 115, 124 and 147 grain, Federal Premium 124 grain, and Monarch 115 grain. It shot nice tight groups, 2 to 2.5 inches, from 7 yards out to 25 yards.
No malfunctions at all. The magazines are proprietary, but they ran just fine. The stock trigger breaks at 5.5 lb, with a nice tactile break and a decent reset. It has a little more travel than I would have preferred, but overall it’s a good performer for a stock trigger.
Ergonomically, it’s very comfortable. Mine came with the Strike Industries FSA folding brace. I’m not a huge fan of the hard plastic brace, but it works well.
What You Can’t Change on the Stock Gun
The factory lower is injection-molded, glass-filled polymer, and its fire control group is made for the Kuna alone. AR-15 triggers won’t fit it. HB Industries makes a replacement trigger for the factory lower. If you want an AR trigger, the lower has to go, and that is where Part 2 starts.
The magazines are Kuna-specific too. Springfield and ProMag both make them. Factory Kuna magazines are at MidwayUSA.
Which Kuna to Buy
- Threaded 1/2×28 or Tri-Lug. If you plan to run a three-lug pistol suppressor, a Tri-Lug model saves you an adapter. The threaded models take a direct-thread can or a three-lug adapter. Our guide to suppressor mounting systems covers the trade-offs.
- Brace or no brace. The FSA models come with a Strike Industries folding brace. The others have a bare Picatinny end plate for whatever you choose to mount.
- Magazine capacity. The Low Capacity models ship with 10-round magazines, for states that limit capacity.
- 9mm or .40 S&W. Mine is the threaded 9mm model with the Strike Industries FSA brace. It came with the multi-port muzzle brake on its 1/2×28 threads, and that brake was a real pain to remove.
My BC-9 bufferless is a straight blowback gun that takes Glock magazines. The Kuna runs its own magazines and uses a roller-delayed action.
Springfield Kuna Review Verdict
The Kuna is awesome out of the box. It’s a tack driver, it’s nicely balanced, and the roller delay gives it a great recoil impulse. Part 2 of this series walks through my build, fiddly bits included.
You can find the Kuna at Guns.com and Brownells.
If you know of any forums or sites that should be referenced on this listing, please let us know here.



