Disclosure: Powder & Lead may earn a commission on purchases made through affiliate links in this article, at no extra cost to you. We only recommend products we believe in.
Part 1 covered the Springfield Kuna in stock form. This is Part 2: my Kuna FRT build. It runs a Nexus Firearms billet lower, a Nexus trip, an Atrius Super-Selector, a RISE Rave 140 trigger, a TandemKross grip, an Angstadt Arms three-lug adapter and a SilencerCo Spectre 9K. Getting there took some fiddling, including getting the ejector shim aligned. The result was a perfect FRT experience, absolutely brilliant and reliable.

Are FRTs Legal?
Under federal law, yes. On May 16, 2025, the Justice Department announced a settlement with Rare Breed Triggers that ended three cases over forced reset triggers, including National Association for Gun Rights v. Garland in the Northern District of Texas. ATF had classified FRTs as machine guns. The department’s release notes that after the Supreme Court’s 2024 bump stock decision, Garland v. Cargill, the Texas court “concluded that FRTs also cannot be classified as a ‘machinegun.'” Under the settlement, ATF stopped treating them as machine guns and agreed to return seized and surrendered triggers.
State law varies, and some states restrict FRTs. California’s Department of Justice, for one, issued a bulletin on June 2, 2025 saying FRTs remain illegal there as “multiburst trigger activators.” Check your own state’s law before you buy any forced reset device, trigger or selector. None of this is legal advice.
The Kuna FRT Build Parts List
- Lower: Nexus Firearms billet aluminum Kuna lower, push-button magazine release version, sold direct by Nexus.
- Trip: Nexus Kuna Super-Safety trip, the Nexus trip made for super safeties and the Atrius selector.
- Selector: Atrius Development Super-Selector (sold as the Forced Reset Selector)
- Trigger: RISE Armament Rave 140, flat, in black. Single-stage, 3.5 lb.
- Grip: TandemKross hiveGrip for AR-15. I love the tackiness of these things. It’s a great grip.
- Muzzle: Angstadt Arms 3-Lug 9mm muzzle adapter, 1/2×28
- Suppressor: SilencerCo Spectre 9K from Silencer Central, also at Brownells
- Magazines: I run Magpul PMAG EV9 magazines, Magpul’s PMAG for the CZ Scorpion EVO 3. Factory Kuna magazines don’t fit the Nexus lower.
Why the Kuna Needs a New Lower
The Kuna’s factory lower is polymer, and its fire control group is Kuna-specific. No AR-15 trigger fits it, and no FRT or forced reset selector fits it either. Nexus Firearms makes a billet aluminum lower that takes a standard AR-15 trigger, safety selector and pistol grip. The working parts in the upper stay the same.
Two things change with the swap. First, magazines: Nexus built the lower around Magpul’s EV9 PMAG for the CZ Scorpion, says other EVO-pattern magazines “do not work well” with the Kuna bolt, and says stock Kuna magazines are not compatible. Second, the lower is not the serialized part. The upper is, and Nexus says the lower ships without an FFL. Each lower is built to order.
It also opens the Kuna to standard AR-15 triggers. If you want a better trigger and nothing else, the Nexus lower and a good drop-in trigger will do it. Our list of AR-15 upgrades that work covers some of them.
How the Forced Reset Works on This Build
There are two ways to get a forced reset in an AR-pattern lower. One is a forced reset trigger, such as Rare Breed’s FRT-15L3, which replaces the whole fire control group. The other is a forced reset selector, such as the Atrius Super-Selector, which replaces only the safety selector and keeps your trigger. I went the selector route.
The Super-Selector has three positions: safe, semi, and a third forced reset position. In that third position, a cam on the selector works with the moving bolt carrier to push the trigger forward after each shot. You still pull the trigger for every round, and the gun still fires one round per pull. The action resets the trigger instead of your finger.
On an AR-15, the bolt carrier itself works the selector cam. The Kuna’s roller-delayed bolt carrier isn’t shaped like an AR carrier, and that is what the Nexus trip is for. It gives the Kuna’s carrier a surface to drive the forced reset. Nexus sells two: an L3 trip for Rare Breed and Delta Team Tactical drop-in FRTs, and a Super-Safety trip for selectors like the Atrius. Nexus has tested the Atrius selector on its Kuna trip and, per Rifle Configurator’s Kuna FRT guide, recommends pairing it only with the RISE RA-140 on this gun. The Rave 140 is the current version of that trigger, and it’s the one I used.
The Rave 140 is a drop-in, single-stage trigger with a 3.5 lb pull. RISE says it has no take-up and a short reset you can feel, with S7 tool steel parts in an anodized aluminum housing. Anti-walk pins come with it.
The Fiddly Bits: Installing the Kuna FRT Parts
The lower swap itself is simple. Two takedown pins come out, the factory lower comes off, and the Nexus lower goes on. Recoil’s review of the Nexus lower notes that the trigger and grip go in the same way they would in any AR-15 lower. The small parts take more care.
The ejector. Getting it all aligned was a trick. Keep the parts list in Springfield’s Kuna manual open while you work. Here is how the pieces fit together:
- The ejector has a circular form that sits in a hole in a channel.
- A plunger with a flat surface bears on the top of that circular form and keeps it in the hole.
- Behind the plunger is a spring, and a detent that interfaces with a cross pin. The cross pin has a notch.
Make sure the detent is facing the correct way and that the notch interlocks over the ejector, or you’ll lose parts.
The selector. The Nexus lower ships with a safety selector spring shim. The Atrius selector and its detent spring gave me no trouble.
Function check. Before live fire, do the empty-gun function check in the Atrius and Nexus instructions for every selector position, then run a full magazine. Rifle Configurator’s guide lists the problems to watch for on Kuna FRT builds: reset failures, light strikes and hammer follow.
My first function check showed I hadn’t put the ejector back together quite right. Fortunately, I found all the parts. To get the ejector set up correctly, I asked my local gunsmith for help, and he was kind enough to do it on the spot. His vision and dexterity are much better than mine. One more tip: make sure the selector and trigger are inside the trip.
Suppressing It: Angstadt 3-Lug Adapter and Spectre 9K
The Angstadt Arms 3-Lug 9mm adapter (AA093LSD28) threads onto a 1/2×28 barrel in place of the factory brake and gives it a three-lug mount. Mine is the threaded model, and getting that factory brake off was a real pain. It’s hardened steel with a black nitride finish, 1.42 inches long, and it doesn’t need shims. Springfield’s newer Tri-Lug Kunas come with a three-lug mount built in.
The can is a SilencerCo Spectre 9K, the short version of the titanium Spectre 9. Its specs:
- Length: 3.69 inches
- Weight: 3.17 ounces
- Diameter: 1.37 inches
- Material: Grade 5 and Grade 9 titanium
- Calibers: 9mm, and subsonic .300 Blackout
- Full-auto rated: yes
- Mounts: SilencerCo Alpha and three-lug
A can under four inches long keeps the Kuna short. I also tried a HUXWRX FLOW 45 M on it, in both its long and short configurations. Both work, and the Spectre 9K performs better, as I expected. For how three-lug, direct-thread and QD mounts compare, see our suppressor mounting systems guide, and for one can versus several, multi-caliber vs dedicated suppressors.
The federal tax on making or transferring a suppressor has been $0 since January 1, 2026, under Public Law 119-21. On October 9, 2026, ATF said in an open letter that it will no longer enforce NFA registration and approval for suppressors, short-barreled rifles and shotguns, and “any other weapons.” That is an enforcement policy, not a repeal, and state law is unchanged. Civilian suppressor ownership is still illegal in eight states and the District of Columbia. Check your state before you buy.
How the Kuna FRT Build Runs
Perfect FRT experience. Absolutely brilliant and reliable. Once it was put together correctly, it has run absolutely flawlessly with and without the suppressor. I’m about 600 rounds in. The Nexus lower adds about 9 ounces to the gun, and that extra weight makes an already nearly flat-shooting gun even flatter.
The build keeps the Strike Industries FSA brace my Kuna came with, and it stays a braced pistol. On the federal side, a court in Texas vacated ATF’s 2023 pistol brace rule on June 13, 2024, in Mock v. Garland, and after the government agreed to drop its appeal, the Fifth Circuit dismissed it on July 25, 2025. State laws on braced pistols vary, so check yours.
Verdict
The stock Kuna was already awesome. With the Nexus lower, the Atrius selector and the Rave 140, it runs flawlessly. Expect to spend some time on the small parts, the ejector shim included. Buy the lower first, because none of the other fire control parts fit without it. If you haven’t read it yet, Part 1 covers the gun in stock form, and my BC-9 bufferless review covers a very different compact 9mm.
If you know of any forums or sites that should be referenced on this listing, please let us know here.



